Full Hydraulic Single Drum Vibratory Roller

Product Detail

XS143 single drum vibratory roller product is a medium sized vibratory roller mainly applicable to compaction work of base course, secondary base course and fill of different materials, which is the ideal compaction equipment for, high grade highway, airport, port, dam and industrial construction site. The machine equipped with OCEC large power, engine and anti-slip hydraulic drive system better meets engineering construction requirements of different regions.

 

All key parts apply international first-rate brand with high reliability;

a) Equipped with 3-stage Cummins engine;

b) Equipped with Rexroth hydraulic system;

c) Equipped with NO-SPIN drive axle featuring strong drive capacity;

d) Equipped with VOO combination instrument.

 

The threaded hole on side plate of roller frame is designed countersink. The machine is designed 2300mm wide in total and is equipped with a detachable cab for the sake of container transportation in export.

 

Vibrating drum with high reliability and high compaction capacity

The technology of three cores in one is applied to render high amplitude uniformity, avoid polarization and realize excellent compaction capacity;

Four-point support structure is applied to equally divide exciting force to four bearings so as to substantially improve service lives of the bearings!

Use of double framework oil seal structure avoids leakage of lubricating oil and ensures reliability of the vibrating drum.

 

Wide front and rear vision and high control comfort

The cab applies massive glasses and is not set up with any stand column to bring about wide vision

 

With use of such technologies as cab three-dimensional vibration reduction and vibration reduction optimization of vibrating drum, the vibration intensity meets and surpasses the grade allowed in relevant national standard

 

Designs of new appearance covering parts and application of cab sound insulation technology and guiding air flue technology bring about effective heat dissipation.

 

ROPS and FOPS certified cab is optional



The bonnet is able to open by large angle makes maintenance easy.







Item		XS143
Mass
Maximum operating mass		14000
Distribution mass  of front wheel(kg)		8200
Distribution mass  of rear wheel(kg)		5800
Engine
Model		6BTAA5.9-C170
Rated power(KW)		125
Rated speed(r/min)		2200
Compaction performance
Static linear pressure(N/cm)		385
Vibration frequency(Hz)	High  frequency	35
	Low frequency	28
Nominal amplitude(mm)	Large(at  low frequency)	1.86
	Small(at high frequency)	0.88
Exciting force(KN)	Large(at  low frequency)	305
	Small(at high frequency)	225
Running performance
Speed(km/h)	Gear  I	0~4.5
	Gear II	0~6.0
	Gear III	0~7.2
	Gear IV	0~12
Minimum turning outside radius(mm)		6415
Theoretical gradeability(%)		40
Steering angle(°)		±33
Swing angle(°)		±10
Dimension
Complete dimension(mm)	Length	6222
	Width	2300
	Height	3200
Wheelbase(mm)		3101
Minimum ground clearance(mm)		466
Diameter of vibrating drum(mm)		1523
Width of vibrating drum(mm)		2130